Care instructions

Hugo Bassan By On 04/10/2017 at 08:18 0

In Care instructions

Here are some maintenance tips for the various items you find here:


- For 3D boards, the easiest way to remove dust is to use a brush, dry. This will allow you to remove dust with no risk of hanging the dust cloth.

- Wood:

If the wood is oiled or waxed, you will need to renew the operation approximately once a year. With a soft cloth, without overloading, you will apply the finish. Do not forget to wipe off the surplus to avoid having a sticky layer.


- Metal:

if there is anthracite gray wax on it, ditto, you will renew the operation once a year.
Apply a thin coat, allow to dry (as indicated on the box) and then wipe off the excess.

Add a comment